83 Search Results

Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given ofmore » the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.« less

The traditional quark model accounts for the existence of baryons, such as protons and neutrons, which consist of three quarks, as well as mesons, composed of a quark–antiquark pair. Only recently has substantial evidence started to accumulate for exotic states composed of four or five quarks and antiquarks. The exact nature of their internal structure remains uncertain. Here we report the first measurement of quantum numbers of the recently discovered family of three all-charm tetraquarks, using data collected by the CMS experiment at the Large Hadron Collider from 2016 to 2018 . The angular analysis techniques developed for the discoverymore » and characterization of the Higgs boson have been applied to the new exotic states. Here we show that the quantum numbers for parity P and charge conjugation C symmetries are found to be +1. The spin J of these exotic states is determined to be consistent with 2ħ, while 0ħ and 1ħ are excluded at 95% and 99% confidence levels, respectively. The J^PC = 2⁺⁺ assignment implies particular configurations of constituent spins and orbital angular momenta, which constrain the possible internal structure of these tetraquarks.« less

Despite the f₀(980) hadron having been discovered half a century ago, the question about its quark content has not been settled: it might be an ordinary quark-antiquark ($$q\bar{q}$$) meson, a tetraquark ($$q\bar{q}$$$$q\bar{q}$$) exotic state, a kaon-antikaon ($$K\bar{K}$$) molecule, or a quark-antiquark-gluon ($$q\bar{q}$$g) hybrid. This paper reports strong evidence that the f₀(980) state is an ordinary $$q\bar{q}$$ meson, inferred from the scaling of elliptic anisotropies (v₂) with the number of constituent quarks (n_q), as empirically established using conventional hadrons in relativistic heavy ion collisions. The f₀(980) state is reconstructed via its dominant decay channel f₀(980) → π⁺π⁻, in proton-lead collisions recordedmore » by the CMS experiment at the LHC, and its v₂ is measured as a function of transverse momentum (p_T). It is found that the n_q = 2 ($$q\bar{q}$$ state) hypothesis is favored over n_q = 4 ($$q\bar{q}$$$$q\bar{q}$$ or $$K\bar{K}$$ states) by 7.7, 6.3, or 3.1 standard deviations in the p_T < 10, 8, or 6 GeV/c ranges, respectively, and over n_q = 3 ($$q\bar{q}$$g hybrid state) by 3.5 standard deviations in the p_T < 8 GeV/c range. This result represents the first determination of the quark content of the f₀(980) state, made possible by using a novel approach, and paves the way for similar studies of other exotic hadron candidates.« less

A search is presented for the pair production of new heavy resonances, each decaying into a top quark (t) or antiquark and a gluon (g). The analysis uses data recorded with the CMS detector from proton–proton collisions at a center-of-mass energy of 13 TeV at the LHC, corresponding to an integrated luminosity of 138 fb^-1. Events with one muon or electron, multiple jets, and missing transverse momentum are selected. After using a deep neural network to enrich the data sample with signal-like events, distributions in the scalar sum of the transverse momenta of all reconstructed objects are analyzed in themore » search for a signal. No significant deviations from the standard model prediction are found. Upper limits at 95% confidence level are set on the product of cross section and branching fraction squared for the pair production of excited top quarks in the t* → tg decay channel. The upper limits range from 120 to 0.8 fb for a t* with spin-1/2 and from 15 to 1.0 fb for a t* with spin-3/2. These correspond to mass exclusion limits up to 1050 and 1700 GeV for spin-1/2 and spin-3/2 t* particles, respectively. These are the most stringent limits to date on the existence of t* → tg resonances.« less

A measurement of the dijet production cross section is reported based on proton–proton collision data collected in 2016 at $$\sqrt{s}$$ = 13 TeV by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of up to 36.3 fb^–1. Jets are reconstructed with the anti-$$k$$_T algorithm for distance parameters of R = 0.4 and 0.8. Cross sections are measured double-differentially (2D) as a function of the largest absolute rapidity |y|_max of the two jets with the highest transverse momenta $$p$$_T and their invariant mass $$m$$_1,2, and triple-differentially (3D) as a function of the rapidity separation $$y$$*, the totalmore » boost $$y$$_b, and either $$m$$_1,2 or the average $$p$$_T of the two jets. The cross sections are unfolded to correct for detector effects and are compared with fixed-order calculations derived at next-to-next-to-leading order in perturbative quantum chromodynamics. The impact of the measurements on the parton distribution functions and the strong coupling constant at the mass of the Z boson is investigated, yielding a value of $$α$$_S($$m$$_Z) = 0.1179 ± 0.0019.« less

The measurement of Z boson production is presented as a method to determine the integrated luminosity of CMS data sets. The analysis uses proton–proton collision data, recorded by the CMS experiment at the CERN LHC in 2017 at a center-of-mass energy of 13 TeV. Events with Z bosons decaying into a pair of muons are selected. The total number of Z bosons produced in a fiducial volume is determined, together with the identification efficiencies and correlations from the same data set, in small intervals of 20 pb^–1 of integrated luminosity, thus facilitating the efficiency and rate measurement as a functionmore » of time and instantaneous luminosity. Using the ratio of the efficiency-corrected numbers of Z bosons, the precisely measured integrated luminosity of one data set is used to determine the luminosity of another. For the first time, a full quantitative uncertainty analysis of the use of Z bosons for the integrated luminosity measurement is performed. The uncertainty in the extrapolation between two data sets, recorded in 2017 at low and high instantaneous luminosity, is less than 0.5%. We show that the Z boson rate measurement constitutes a precise method, complementary to traditional methods, with the potential to improve the measurement of the integrated luminosity.« less

The mass of the top quark is measured in 36.3 fb^-1 of LHC proton–proton collision data collected with the CMS detector at $$\sqrt{s}=13\,\text {Te}\hspace{-.08em}\text {V}$$. The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77more » ± 0.37 GeV. This approach significantly improves the precision over previous measurements.« less

A generic search is presented for the associated production of a Z boson or a photon with an additional unspecified massive particle X, pp → pp + Z/γ + X, in proton-tagged events from proton–proton collisions at $$\sqrt{s}$$ = 13 TeV, recorded in 2017 with the CMS detector and the CMS-TOTEM precision proton spectrometer. The missing mass spectrum is analysed in the 600–1600 GeV range and a fit is performed to search for possible deviations from the background expectation. No significant excess in data with respect to the background predictions has been observed. Model-independent upper limits on the visible promore » duction cross section of pp → pp + Z/γ + X are set« less

A novel technique based on machine learning is introduced to reconstruct the decays of highly Lorentz-boosted particles. Using an end-to-end deep learning strategy, the technique bypasses existing rule-based particle reconstruction methods typically used in high energy physics analyses. It uses minimally processed detector data as input and directly outputs particle properties of interest. The new technique is demonstrated for the reconstruction of the invariant mass of particles decaying in the CMS detector. The decay of a hypothetical scalar particle $\mathcal{A}$ into two photons, $\mathcal{A}\to \gamma \gamma$, is chosen as a benchmark decay. Lorentz boosts ${more »}_{}$ γ L =60–600 are considered, ranging from regimes where both photons are resolved to those where the photons are closely merged as one object. A training method using domain continuation is introduced, enabling the invariant mass reconstruction of unresolved photon pairs in a novel way. The new technique is validated using ${\pi }^0\to \gamma \gamma$ decays in LHC collision data.« less

Multijet events at large transverse momentum ($$p$$_T) are measured at $$\sqrt{s}$$ = 13 TeV using data recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 36.3 fb^-1. The multiplicity of jets with $$p$$_T > 50 GeV that are produced in association with a high-$$p$$_T dijet system is measured in various ranges of the $$p$$_T of the jet with the highest transverse momentum and as a function of the azimuthal angle difference Δ$$\phi$$_1,2 between the two highest $$p$$_T jets in the dijet system. The differential production cross sections are measured as a function of the transversemore » momenta of the four highest $$p$$_T jets. The measurements are compared with leading and next-to-leading order matrix element calculations supplemented with simula tions of parton shower, hadronization, and multiparton interactions. In addition, the measurements are compared with next-to-leading order matrix element calculations combined with transverse-momentum dependent parton densities and transverse-momentum dependent parton shower.« less